Omar SobhandClaude Opus 4.8
5f2456e5cb
Rounds out the sampler with the remaining effects:
- bloom — a filled diamond grows from the centre to full, then collapses.
- breathe — a dithered shimmer that swells and fades (density ramp via a
fixed per-pixel threshold, since the matrix can't truly fade).
- checker — a checkerboard that inverts on each beat.
Full cycle is now rain -> knight-rider -> comet -> ripple -> bloom ->
breathe -> sparkle -> checker -> wipe. Compiled + flashed E2E (2057 bytes).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
51 lines
2.1 KiB
Markdown
51 lines
2.1 KiB
Markdown
# Uno Q LED-matrix sketches
|
||
|
||
Animations for the Arduino Uno Q's built-in **13×8 monochrome blue** LED matrix
|
||
(104 pixels on the STM32U585 MCU). The LEDs are physically blue and on/off only
|
||
— there is **no colour or brightness control** in software.
|
||
|
||
| Sketch | What it does |
|
||
|--------|--------------|
|
||
| `matrix_rain/` | Digital "rain" — per-column drops (head + short trail) at staggered speeds. |
|
||
| `matrix_effects/` | Sampler that cycles rain → knight-rider → comet → ripple → bloom → breathe → sparkle → checker → wipe. |
|
||
|
||
## How they work
|
||
|
||
The matrix API is intentionally tiny: `matrix.begin()` and
|
||
`matrix.loadFrame(const uint32_t frame[4])`. There is **no** `drawFrame`,
|
||
`setPixel`, `clear`, etc. — those don't exist on this core and won't compile.
|
||
|
||
So each frame is built in an `8×13` boolean `grid`, then packed into the
|
||
`uint32_t[4]` (128 bits; 104 used) the driver wants — row-major, MSB-first, so
|
||
pixel 0 is `frame[0]` bit 31:
|
||
|
||
```cpp
|
||
uint16_t bit = 0;
|
||
for (uint8_t y = 0; y < 8; y++)
|
||
for (uint8_t x = 0; x < 13; x++) {
|
||
if (grid[y][x]) frame[bit >> 5] |= (1UL << (31 - (bit & 31)));
|
||
bit++;
|
||
}
|
||
matrix.loadFrame(frame);
|
||
```
|
||
|
||
To make a new effect, just fill `grid` differently each frame and call `show()`.
|
||
|
||
## Compile & flash (on the board, over adb)
|
||
|
||
```sh
|
||
S=<adb-serial>
|
||
adb -s $S push matrix_effects /home/arduino/sketches/
|
||
# TMPDIR override dodges the adb shell's /data/local/tmp (breaks arduino-cli)
|
||
adb -s $S shell 'cd /home/arduino/sketches/matrix_effects && \
|
||
TMPDIR=/tmp arduino-cli compile --fqbn arduino:zephyr:unoq --export-binaries .'
|
||
adb -s $S shell 'arduino-flash /home/arduino/sketches/matrix_effects/build/arduino.zephyr.unoq/*.elf-zsk.bin'
|
||
```
|
||
|
||
`arduino-flash` runs OpenOCD (linuxgpiod SWD) and writes the sketch at
|
||
**`0x80F0000`** — the address in the board's `boards.txt`
|
||
(`unoq.upload.address`) for `arduino:zephyr` **0.51.0**. (Older QClaw docs cite
|
||
`0x8100000`; that's stale for this core — trust `boards.txt`.) The flash ends
|
||
with a reset, so the sketch runs immediately. Nothing may be visible for the
|
||
first ~20–30 s after a cold power-on while the boot logo owns the matrix.
|