7 Commits

Include renames

Author	SHA1	Message	Date
Omar SobhandClaude Fable 5.1	75ab6e77b4	FSI2 overset march: print every coupling setting once (coupler, floor, rtol, stall accept, max subit, predictor, s, patch offset × rows) and add RTX_FSI2O_LOAD_SETTLE (rigid steps after a loaded state, clock put back; default 20) — P5-3 lost a day to the default floor 2e-4 against the overnight marches' 1e-6: at 2e-4 every s = 1 release at ny = 62 rings at ± 1000 N/m (the flag's thickness breathing), at 1e-6 all are clean, thick patches included ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-08 14:52:02 -07:00
Omar SobhandClaude Fable 5.1	3c2add3f32	P5 audit: the overset march saves the composite at every N-th committed step (RTX_FSI2O_SAVE_EVERY: background, the deformed patch's nodes, its vectors, d, ddot, time), and fsi2_overset_audit_of_saved_instants (RTX_FSI2O_AUDIT=dir) rebuilds the composite around each saved patch (build_case_with an initial mesh, so the overlap is the instant's) and prints the solver-metric chain — the CFD23 instrument on the moving patch ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 09:13:07 -07:00
Omar SobhandClaude Fable 5.1	3a68048934	rtx-cfd: cylinder_flag_patch_deformed_from — the warm-started regeneration (P5's cost lever): the previous patch's interior and its outer ring projected onto the new offset polygon as the start, and an IDEMPOTENT build (one Winslow sweep alternating with the ray re-spacing; the P4-0 one-shot is not a fixed point — measured as the interior moving 0.05 h per build at rest), so a base converged as that map's fixed point stays put (9e-11 h at rest) and each build tracks the outline (interior/wall motion 0.99–1.14, worst angle 74.7°, wall row 0.37 h) 4.5× faster than the cold build; the rigid generator untouched (pins pass); fsi2 overset harness: RTX_FSI2O_WARM_SWEEPS with the converged base as the initial patch and the committed step's mesh as each step's warm start ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 09:10:05 -07:00
Omar SobhandClaude Fable 5.1	62f1d4bf9b	P5-1: RTX_FSI2O_NEWMARK_GAMMA — Newmark dissipation on the flag (β = (γ + ½)²/4); at γ = 0.9 the s = 1 overset march holds 0.3 s from the cached state (789 steps, 1.8 passes, no death) with the physical onset, where γ = ½ ran away in 90 steps: the flag's thickness breathing, resolved at s = 1 and felt by the body-fitted wall, damped at the source ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 08:45:45 -07:00
Omar SobhandClaude Fable 5.1	565215baf9	P5-1 instruments and discriminators: RTX_FSI2O_NO_WALL_VEL, _FREEZE_PATCH, _VOLUME_PRESERVE (the imposed wall velocity's net flux removed uniformly along the wall), the pass trace carries the fluid's power on the flag, the wall-pressure roughness, the patch's pressure level, the wall's net volume flux against the FEA polygon's area rate, and the mass defects — the s = 1 runaway is the flag's thickness breathing (ν = 0.4 Quad8) seen by the body-fitted wall as a volume flux equal to the polygon's area rate, answered by the projection's pressure level at ρ/dt ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 08:37:34 -07:00
Omar SobhandClaude Fable 5.1	2ed36c3a8c	P5-1 instruments: the overset fluid saves/loads its rigid-phase state (RTX_FSI2O_SAVE / _LOAD — a coupling experiment then costs seconds, not the 12-minute rigid march), dumps the interface edges when the composite refuses a patch (RTX_FSI2O_DUMP_DIR, at the advance where the overlap is rebuilt), the release time is the fluid's clock; patch_cylinder_flag_deformed: cells inside the flag are holes at small bends and both sweep counts (the cantilever shape does not reproduce the P5-1 death — the CSVs show a coupling runaway), and a dumped-edges reproduction test ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 08:09:56 -07:00
Omar SobhandClaude Fable 5.1	f0b2563bf8	P5-1: FSI2 with the fluid on the overset — fsi2_harness/overset.rs (the background without a body, the cylinder–flag patch regenerated around the deformed flag every pass via set_patch_mesh, the wall velocity from the interface velocities along the wetted polygon, the load from the patch's wall faces into WettedSurface::transfer_load — no probes, no clamp, no smoothing), fsi2_harness/overset_march.rs (the harness's rigid phase / release / subiterated coupling with its acceptance rule, no rescue machinery, death returned not panicked), tests/turek_hron_fsi2_overset.rs (RTX_FSI2O_* knobs); rtx-cfd: CurvilinearPisoSolver::wall_tractions (per-face pressure + full-stress traction, surface_force sums the same terms bit-identically); Interface::edges (bottom/tip/top for the generator); cylinder_flag_mms RTX_CF_BEND (P5-0 gate iv: Stokes orders 2.14 / 2.09 on the flag bent to 80 mm) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 07:16:53 -07:00