3 Commits

Include renames

Author	SHA1	Message	Date
Omar SobhandClaude Fable 5	bff84ccdcc	rtx-cfd: mask hysteresis — sticky cell classification against a reference mask ... The measured FSI3 killer is the bistable mask: one geometry (|d| identical to 4 digits) samples two load branches (60 vs 120 kN), and the traced s=1 death is the secant walking a 20x load cliff (68,886 -> 1,307,938 N over a 1e-3 candidate change). A sticky band makes the load map single-valued at the crossing: formerly-fluid cells flip only at phi < -band, formerly-solid at phi > band, classified against the mask held at rebuild time — in a coupling loop, the restored committed step-start mask. Band 0 is structurally bit-identical (phi > -0.0 <=> phi > 0.0) and verified digit-for-digit on both committed defaults (FSI2 and FSI3, every physics digit). Measured cost on the translating-circle MMS at band 0.25h: +0.5% field error (u/p ratios 1.17/2.12 vs the no-hysteresis moving levels 1.16/2.11); flip delay = band/(v dt), deterministic. Exposed as RTX_FSI{2,3}_HYST in multiples of h_min. Co-Authored-By: Claude Fable 5 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-08-26 15:27:09 -05:00
Omar SobhandClaude Fable 5	4534d90684	rtx-fea + rtx-cfd: the single-step seams FSI2 stands on ... rtx-fea: NonlinearDynamicAnalysis refactored onto a NonlinearDynamicStepper - set_nodal_forces on both (the interface load of a coupling subiteration, replaceable between steps and between subiterations of one step); - step(&DynamicState) is a pure function of the start-of-step state and the current forces - commits nothing, so a partitioned coupling re-runs one Newmark step to the interface fixed point (the piston semantics); - run() marches through the same stepper: one code path, pinned from both ends (linear limit, CSM3, and a new manual-drive == run() assertion); - new test: a nodal step load oscillates about the *static* nonlinear analysis's deflection (cross-code-path, mean within 3%, amplitude 6%), with re-run determinism and force-swap sensitivity asserted mid-march (a one-step response to a force change is ~ beta dt^2 - the first assertion draft demanded 10% and was corrected against the physics). rtx-cfd: the subiteration seam and the moving no-slip closure - EmbeddedPisoSolver::snapshot()/restore() (mask + time + init flag; the mask is now Clone): re-running a fluid step within a subiteration is bit-identical to never having diverted - proven on a moving body with cells flipping in the re-run window; - polygon_interface_velocity: nearest-edge linear interpolation of per-vertex velocities, exact for the linear-along-edge boundary data a finite-element interface hands over - the no-slip closure that replaces FSI1's zero-velocity polygon. Suites: rtx-fea 567, rtx-cfd 325, rtx-fsi piston+transfer - all green. Co-Authored-By: Claude Fable 5 <[email protected]> Claude-Session: https://claude.ai/code/session_01Lnyrw33Lu6rUhW42E9KHwq	2026-08-20 20:00:49 -07:00
Omar SobhandClaude Fable 5	0ad31abb6b	rtx-cfd: F2 — the moving embedded body, and falsifier 3 measured ... EmbeddedPisoSolver::set_moving_body: the mask is rebuilt at the end-of-step geometry every step, and the new mask's ghost values are reconstructed FROM THE PREVIOUS CORRECTED FIELD (EmbeddedMask:: impose_from — the boundary-history principle extended to a moving wall), so a stationary body run through the moving path is bit-identical to the static path, which is the first test. A velocity face that flips solid -> fluid enters the new interval holding exactly the ghost reconstruction the previous step left on it — a consistent near-wall value, not garbage; a fresh pressure cell is refilled from its fluid neighbours before the predictor's gradient can read the value it kept while inside the body. The body must move under a cell per step (the convective dt limit already enforces this for bodies slower than the local peak velocity). EmbeddedResult reports fresh_cells. tests/embedded_moving.rs: - a stationary body through the moving path: 0.0 difference over 100 steps (and zero fresh cells, identical ghost corrections); - a circle (r = 0.2) translating through the steady manufactured field with the exact field as its surface velocity — the solution must hold still while the mask sweeps 84 cells fresh over 300 steps at n = 32: max L2 velocity error 9.85e-3 = 1.16x the static steady level (8.489e-3), max L2 pressure error 4.67e-2 = 2.11x the static level (2.22e-2), bulk |div u| 1.6e-7, projection residual 5.9e-9 every step. That pressure ratio is the geometry decision's falsifier 3 (omni-cortex docs/turek_hron_geometry_decision.md): fresh-cell transients sit at ~2x the static discretisation error, not orders above it — the falsifier does not fire and no cut cells are needed. Measurement note, recorded in the test: the divergence of body-adjacent cells read after the end-of-step ghost re-imposition is a one-step lag by design (the next projection honours the re-imposed prescribed fluxes — the same lag the static path has); the continuity claims are the projection residual and the bulk divergence over all-fluid-faced cells. Deferred: an oscillating-cylinder benchmark against published force histories (Duetsch et al. 1998) when the FSI rungs need it. rtx-cfd 321 -> 323 green. Co-Authored-By: Claude Fable 5 <[email protected]>	2026-08-20 13:07:28 -07:00