80 Commits

Include renames

Author	SHA1	Message	Date
Omar SobhandClaude Fable 5.1	8c130c55c8	PERF-2 P2-c: RTX_FSI2O_INNER_STOP knob — the background Poisson's inner stop as a multiple of the Schwarz tolerance (default 0.1; the band-gated ladder on the CG iteration count) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-16 00:50:52 -05:00
Omar Sobh	822041fb3f	PERF-2 P2: the parallel maps run only on levels with ≥ 8,192 active cells and in tasks of ≥ 2,048 cells (a fork-join over a small level costs more than the map); values unchanged	2026-09-16 00:10:42 -05:00
Omar SobhandClaude Fable 5.1	7f144e0005	PERF-2 P2: the red-black colour maps, the residual and the V-cycle's per-level maps on rayon threads (MultigridParameters::threads; RTX_THREADS in the harness; rtx_cfd::configure_threads) — each colour's values computed from the unchanged other colour into a scratch and written back, the L1 sum in the serial order: bit-identical to the serial red-black (pin: 4 right-hand sides at 4 threads); the coarsest level stays serial; no effect on the lexicographic regime ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 23:59:29 -05:00
Omar Sobh	f9d38bee55	rtx-cfd/rtx-fsi: every EmbeddedParameters literal carries the smoother field (all test targets of both crates compile)	2026-09-15 23:50:19 -05:00
Omar SobhandClaude Fable 5.1	cb5771fa71	PERF-2: red-black symmetric Gauss–Seidel smoother behind a knob (MgSmoother::RedBlack; default lexicographic = the recorded regime, bit-identical) — red/black cell lists per level, the symmetric pair red,black,black,red, the operator cache keyed on the smoother; EmbeddedParameters::poisson_smoother, harness knobs RTX_FSI2O_MG_RB (overset) and RTX_FSI2_MG_RB (embedded, the noise probe); pin: solves the masked problem to the same stop, agrees with lexicographic to 2e-12, cached = uncached bit for bit ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 23:48:55 -05:00
Omar Sobh	26904e37d8	PERF-2 P1.b: the polyline index prunes from the start with an upper bound from each chunk's first vertex (never the answer; the strict-minimum scan rule is unchanged), so a query near the polygon's far end no longer scans every chunk; pin unchanged, 0 mismatches	2026-09-15 23:35:40 -05:00
Omar SobhandClaude Fable 5.1	e0b5983436	PERF-2 P1.2: the overlap map's cell classification skips the point location for background cells outside the patch's node bounding box (no patch cell can contain them and the body lies inside the patch: Active, the class the search returns); PatchMesh::bounding_box ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 23:34:40 -05:00
Omar SobhandClaude Fable 5.1	79c18def32	PERF-2 P1.1: the multigrid-PCG's prepared operator (hierarchy, f64 fine level, active cells, components) cached on the embedded solver and reused while the operator is bit-identical (an exact key over the coefficient bit patterns, the mask and the hierarchy parameters); solve_multigrid_pcg_cached gives the uncached solve's answer bit for bit (pin poisson_cache_exact.rs: five right-hand sides on one operator, a one-coefficient miss, both precisions); the CG driver split into Prepared::build + run_pcg ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 23:30:53 -05:00
Omar SobhandClaude Fable 5.1	01830e5c8d	PERF-2 P1: exact chunked polyline index for the O-grid's sliding outer ring — PolylineIndex::nearest returns nearest_on_polyline's point bit for bit (same segments, same order, same strict minimum; chunks skipped only when their box is farther than the best by more than 1e-12 relative), used by the Winslow sweep and the two ring projections; pin: 0 mismatches over 39,864 queries on a 3,166-point rounded outline including vertices, mid-points and ties ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 23:08:09 -05:00
Omar Sobh	11f71b832c	rtx-cfd: the regeneration profile block sits above the too_many_arguments attribute, not between it and its function	2026-09-15 22:53:40 -05:00
Omar SobhandClaude Fable 5.1	1547d14ff1	PERF-2 P0-b: CG iterations per Poisson solve in the profile (ms per V-cycle) and sub-timers inside the patch regeneration (outline, hull + offset, ring projection, Winslow sweeps, respace, warm bookkeeping, mesh finalisation) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 22:53:26 -05:00
Omar SobhandClaude Fable 5.1	172a26dee4	PERF-2 P0: intra-step profiler — StepTimers on the overset solver (RTX_PROFILE; overlap build / predictors / patch BiCGSTAB / background Poisson with its setup-vs-iterate split / round exchange / apply / end exchange), PoissonSolution carries setup_ns and iterate_ns, the harness times advance / restore / snapshot / load sampling / force / FEA predictor and prints the wall split of the coupled phase; no clock is read when profiling is off; the reclassified/step progress denominator fixed (was ×4) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 22:25:52 -05:00
Omar SobhandClaude Fable 5.1	96a7f1c700	rtx-cfd: Robin wall sign pin — a still closed annulus under a uniform pressure above a zero datum: the explicit offset recedes into the body at exactly −p₀/(α(1+g)) (3e-16), the implicit compliant term answers with a pressure DROP (mean 0.17 of p₀, max 0.36) that absorbs the recession (net wall flux 6e-19 of 0.51); the steady MMS pin is blind to the sign of both parts ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 11:17:38 -05:00
Omar SobhandClaude Fable 5.1	1c98156653	rtx-cfd: the deformed-tip outline chooses the flat / semicircle branch against the UNDEFORMED half-thickness — at the semicircle setting the deformed tip's radius breathes by nanometres and flipped the topology (143 → 144 points) within the first steps of the P6-b ny 41 cap-12 release at every α; pin: the point count is fixed under ± 1e-6 thickness breathing at h 10 / 6.6 mm and ny 41, semicircle and flat ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 11:13:55 -05:00
Omar SobhandClaude Fable 5.1	c3dbd5040a	P6-b design 2: the Robin wall on the patch's Inner side — RobinWall { alpha, datum } with the wall velocity u_s + (t_f − datum)/α (explicit, damped by the wall's own viscous gain μ/(α d)) and the compliant-wall pressure term |S| p'/α implicit in the projection (the added-mass operator in the fluid's own response); Dirichlet bit for bit when off; MMS pin on the skewed annulus (orders 2.46/2.13 at α = 10 and 100 μ/h, the Dirichlet values; a 1e12 wall reproduces Dirichlet to 2e-6); OversetPisoSolver::patch_mut; harness knob RTX_FSI2O_ROBIN_ALPHA with the previous pass's tractions as the datum, printed in the header ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01YJPeT6WA2e7YvAnS875AHL	2026-09-15 10:46:35 -05:00
Omar SobhandClaude Fable 5.1	415c32ab04	overset mesh: the flat-tip outline (P5-3 option B) — cylinder_flag_outline_deformed_tip / cylinder_flag_patch_deformed{,_from}_tip take the tip's corner radius (t = the recorded semicircle, bit for bit; smaller = the benchmark's flat face between corner arcs sampled at the wall spacing, point count fixed across the deformation, the tip's corners kept off the hull source); pins: corner t reproduces the recorded outline, the 2.5 mm outline has the exact area excess with no collapsed spacing, the O-grid builds straight and at ± 80 mm cold and warm at ny 41/62; harness knob RTX_FSI2O_TIP_CORNER (default 0.01) on the cold and warm builds, printed in both headers; pinned-toolchain fmt on touched crates ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01LzcjQX7tvgn87CQCyg9Cfr	2026-09-13 22:22:08 -05:00
Omar SobhandClaude Fable 5.1	754dcd3679	overset: the energy pin (P5-3) — the rigid cylinder + flag outline pitching about the cylinder's centre in still fluid on the moving patch at the FSI2 fluid and grid; per-cycle net fluid work on the body (must be ≤ 0 at every h), gross +/− split, and the last-two-period moment fit → added inertia + rotational damping; knobs RTX_OVERSET_NY / _EP_PERIODS / _EP_TIP / _EP_F; ny 41 one-period smoke: net −5.62 J/m, damping 56.9 N·m·s/m (π c θ0² ω = 5.6 J, self-consistent), 21 s ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01LzcjQX7tvgn87CQCyg9Cfr	2026-09-12 20:57:58 -05:00
Omar SobhandClaude Fable 5.1	914d369efe	overset: the stamp-energy instrument (P5-3's energy-source measurement) — OversetResult gains stamp_energy (½ρ(u_stamped² − u_before²)·dx·dy summed over the fringe faces after the flux balance on a reclassification step) and reclass_energy (the faces touching a cell whose class changed); the replay CSV logs both plus the reclassified-cell count per step — the comparator showed the plate loads per unit motion agree with ours to ~10 %, so the discrepancy is our limit-cycle amplitude, an h-growing energy source, and the hole boundary's reclassification is the candidate ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-12 17:32:05 -05:00
Omar SobhandClaude Fable 5.1	33534ee688	overset added-mass pin (P5-3): a no-slip cylinder on the moving patch oscillating in a closed box of still fluid, the force fitted over the last two periods — C_m = 1.069 (n = 32) / 1.097 (n = 64) against Stokes's 1.064 plus box blockage: the composite's unsteady pressure response is right, the FSI2 lift excess is not the unsteady term's scale ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-09 18:01:53 -07:00
Omar SobhandClaude Fable 5.1	3e019d1491	P5-3 instruments: per-region wall loads on saved instants (top / bottom / tip arc / fillets+cylinder — drag, lift, normal-traction mean/min/max; RTX_FSI2O_AUDIT_FACES, RTX_FSI2O_AUDIT_ONLY) and the patch-thickness knobs (RTX_FSI2O_PATCH_OFFSET / _PATCH_ROWS, RTX_OVERSET_PATCH_OFFSET / _PATCH_ROWS; save tags carry the offset) — the overlap band sat at a fixed number of cells (6 h) and moved inward in metres with refinement ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-08 05:35:14 -07:00
Omar SobhandClaude Fable 5.1	06229dd9a2	rtx-cfd: the deformed cylinder–flag build's hull source carries the deformed outline — the cylinder + tip disc alone give the chord under a bent flag's convex side (P5-2 died at tip −35 mm with the patch 4.4 h thick where 6 h was asked, an acceptor's donor on a prescribed face); the death reproduced from the last saved instant by extrapolating the interface (fsi2_overset_probe_death_from_instant, with the failing acceptor's ray geometry and the overlap depths that build) and gone with the fix at every τ; RTX_FSI2O_ROWS; the zero-displacement mesh gate at 1e-5 (the pipeline's), the outline gate 1e-12 unchanged ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 10:25:46 -07:00
Omar SobhandClaude Fable 5.1	3a68048934	rtx-cfd: cylinder_flag_patch_deformed_from — the warm-started regeneration (P5's cost lever): the previous patch's interior and its outer ring projected onto the new offset polygon as the start, and an IDEMPOTENT build (one Winslow sweep alternating with the ray re-spacing; the P4-0 one-shot is not a fixed point — measured as the interior moving 0.05 h per build at rest), so a base converged as that map's fixed point stays put (9e-11 h at rest) and each build tracks the outline (interior/wall motion 0.99–1.14, worst angle 74.7°, wall row 0.37 h) 4.5× faster than the cold build; the rigid generator untouched (pins pass); fsi2 overset harness: RTX_FSI2O_WARM_SWEEPS with the converged base as the initial patch and the committed step's mesh as each step's warm start ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 09:10:05 -07:00
Omar SobhandClaude Fable 5.1	2ed36c3a8c	P5-1 instruments: the overset fluid saves/loads its rigid-phase state (RTX_FSI2O_SAVE / _LOAD — a coupling experiment then costs seconds, not the 12-minute rigid march), dumps the interface edges when the composite refuses a patch (RTX_FSI2O_DUMP_DIR, at the advance where the overlap is rebuilt), the release time is the fluid's clock; patch_cylinder_flag_deformed: cells inside the flag are holes at small bends and both sweep counts (the cantilever shape does not reproduce the P5-1 death — the CSVs show a coupling runaway), and a dumped-edges reproduction test ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 08:09:56 -07:00
Omar SobhandClaude Fable 5.1	d74571e21a	rtx-cfd: the deformed cylinder–flag outline's edge fractions come from the UNDEFORMED straight edge (x_tip_ref), so the patch topology is the mesh family's and not the deformation's — the P5-1 gate run died at the first bend with set_mesh refusing 143 → 144 wall cells; the P5-0 test now gates ns across amplitudes (143 at −80 / +40 / +80 mm) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 07:34:26 -07:00
Omar SobhandClaude Fable 5.1	f0b2563bf8	P5-1: FSI2 with the fluid on the overset — fsi2_harness/overset.rs (the background without a body, the cylinder–flag patch regenerated around the deformed flag every pass via set_patch_mesh, the wall velocity from the interface velocities along the wetted polygon, the load from the patch's wall faces into WettedSurface::transfer_load — no probes, no clamp, no smoothing), fsi2_harness/overset_march.rs (the harness's rigid phase / release / subiterated coupling with its acceptance rule, no rescue machinery, death returned not panicked), tests/turek_hron_fsi2_overset.rs (RTX_FSI2O_* knobs); rtx-cfd: CurvilinearPisoSolver::wall_tractions (per-face pressure + full-stress traction, surface_force sums the same terms bit-identically); Interface::edges (bottom/tip/top for the generator); cylinder_flag_mms RTX_CF_BEND (P5-0 gate iv: Stokes orders 2.14 / 2.09 on the flag bent to 80 mm) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 07:16:53 -07:00
Omar SobhandClaude Fable 5.1	c2451fbacf	rtx-cfd: P5-0 — cylinder_flag_patch_deformed / cylinder_flag_outline_deformed: the O-grid around the cylinder and the FEA's deformed flag edges (FlagEdges bottom / tip / top), edges resampled at the rigid outline's graded arclength spacing, root fillets from the rigid construction, the tip semicircle from the deformed tip's centre and axis; the O-grid body factored out (o_grid_from_outline, hull_source) and the rigid generator kept bit-identical (its pins pass); gates: zero displacement reproduces the rigid outline to 6e-17 (mesh 2.5e-8 through the hull/Winslow pipeline, recorded), ±80 mm cantilever shapes valid at 80° with wall row 0.43 h, along-body 0.196 h, wall nodes on the edges to 6e-17, ny = 41 overlap builds ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 07:10:01 -07:00
Omar SobhandClaude Fable 5.1	cee9adef26	rtx-cfd: overset_cfd23 RTX_OVERSET_CFD23_PHASE=N — the momentum chain's stages sampled every N steps and averaged over the window; over whole shedding periods the unsteady terms vanish and the averaged chain is exact (the patch balance's unstored unsteady term included) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 04:14:55 -07:00
Omar SobhandClaude Fable 5.1	1a8f4aaebe	rtx-cfd: OversetPisoSolver::set_time; overset_cfd23 resumes a march from a saved field (RTX_OVERSET_CFD23_RESUME_T, _T_START) — CFD3 ny = 82's wake is still growing at t = 6–9 s (half-window amplitudes 187 / 339), the settled amplitude needs t = 15 ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 00:08:27 -07:00
Omar SobhandClaude Fable 5.1	ec17217e9e	rtx-cfd: overset_cfd23 RTX_OVERSET_CFD23_ND=explicit — the patch's across-diffusion explicit (dt limit then includes the n-spacing) for the 10 mm damping-floor probe; field tags carry it ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-06 20:44:07 -07:00
Omar SobhandClaude Fable 5.1	11d001fe48	rtx-cfd: solver_metric_force carries the scheme's limited face correction with the predictor's far-upwind choice, so the flux form is the solver's under TVD too (CFD2 ny = 41: three boxes spread 1.8 N/m → 5e-13; the upwind-only form read 120.2 for a solver box of 126.0) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-06 17:42:47 -07:00
Omar SobhandClaude Fable 5.1	ce3cbcce57	rtx-cfd: overset_cfd23 — Turek–Hron CFD2/CFD3 on the overset (the harness's ramped inflow from rest, TVD background and patch, 3-round cap), loads by the patch wall stress with the solver-flux-form box and the CV formula beside it as window statistics, CFD3 frequency from lift crossings, the solver-metric momentum chain at the final state (solved-face residual is the pin), save/load of the fields by case; momentum_residual checks the far-upwind neighbours explicitly under a limited background (the van Albada limiter swallows a NaN silently) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-06 17:10:18 -07:00
Omar SobhandClaude Fable 5.1	36af178980	rtx-cfd: overset_cfd1 RTX_OVERSET_ROWS — the overlap depth (patch rows kept non-hole below the acceptor row, default 4) as a knob for the §5.11 band probe; saved-field tags carry it; rows ≤ 3 are refused by the map at ny = 41 (acceptor donors reach the hole at the flag tip) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-06 15:30:31 -07:00
Omar SobhandClaude Fable 5.1	4c000266d9	rtx-cfd: overset momentum residual carries its pieces per ring face (time, convective, diffusive, pressure); overset_cfd1 offline probes on the saved fields — RTX_OVERSET_CFD1_FRONT dumps the cylinder-front faces by piece, RTX_OVERSET_CFD1_RAW re-evaluates the ring on the raw interpolated stamping without balance_fringe_fluxes (the balance is not the ring's source: +0.241 raw vs +0.247 balanced at ny = 41 upwind) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-06 14:37:08 -07:00
Omar SobhandClaude Fable 5.1	0215c7d6a5	rtx-cfd: CurvilinearPisoSolver::momentum_balance — the patch's own momentum balance on its solved cells in the scheme's fluxes (outward ρFu_f with the predictor's face value, Laplacian-form μ∇u·S on the solved/acceptor interface and the wall, the least-squares pressure volume sum vs the face-pressure integrals); flux_force, wall_force, pressure_defect δP; overset_cfd1 prints it and the acceptor band's mismatch, saves the patch flux, and RTX_OVERSET_CFD1_LOAD=dir runs the diagnostics offline on saved fields ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-06 14:13:04 -07:00
Omar SobhandClaude Fable 5.1	e31576d543	rtx-cfd: OversetPisoSolver::solver_metric_force — the box force in the predictor's own flux form (upwind convective, diffusive, cell pressure on the momentum control volumes' faces, minus the unsteady term); box-independent to rounding in the active region (five boxes spread 2e-12 at step 5 vs the CV formula's ±0.5 %); overset_cfd1 prints wall − box = ring Σr + rest and saves the settled fields under RTX_OVERSET_CFD1_SAVE ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-06 13:47:43 -07:00
Omar SobhandClaude Fable 5.1	6f9b0d43b2	rtx-cfd: OversetPisoSolver::momentum_residual — the background predictor's own staggered stencil (u_rhs/v_rhs, factored out of the predictor bit-identically) evaluated on every face of a NaN-masked field; solved faces read rounding, the active–fringe interface reads the composite's pressure level offset δ·h (cancels in the sum), prescribed fringe–fringe / fringe–hole faces read the stamping's momentum injection; hole ghosts (p, u, v) from a band widened three rows into the hole make every ring face evaluable; overset_cfd1 prints the buckets, the ring x-bands and δ at the settled state; pin: residual vanishes on the solved faces ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-06 13:25:14 -07:00
Omar SobhandClaude Fable 5.1	cbec40b999	rtx-cfd: overset_cfd1 prints five CV boxes (all outside the fringe ring), the wall pressure/viscous split and the fringe extents at the settled state ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-06 10:14:43 -07:00
Omar SobhandClaude Fable 5.1	134ac03870	rtx-cfd: OverlapMap::region_force — momentum flux into a background region (control-volume face formula, one-sided next to holes); overset_cfd1 prints the four momentum routes (CV box, ring outer, hole boundary, wall) and their defects at the settled state ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-06 09:08:01 -07:00
Omar SobhandClaude Fable 5.1	5f780447de	rtx-cfd: PatchConvection::TvdVanAlbada — van Albada deferred correction on the curvilinear predictor (downwind-side linear weight, gradient-ratio r over the face d lengths, far-upwind across the opposite face, boundary faces upwind); annulus MMS orders 2.10/1.69 at 0.24× upwind; cylinder-flag MMS orders 1.98/1.97 (1.06× upwind — diffusion-dominated, recorded); knobs RTX_OVERSET_CFD1_TVD, RTX_OVERSET_MAX_ROUNDS, RTX_CF_SCHEME ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-06 00:21:48 -07:00
Omar SobhandClaude Fable 5.1	02c855b9c4	rtx-cfd: overset Schwarz stall rule guarded (fires only within 10× the tolerance) — unguarded it cut CFD1's transient at round 3 every step and the coupled march diverged at ny=62 (pressure 4e4 → 1e140 by step 450); CFD1 harness knobs (stall, step cap, trace) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-05 21:01:57 -07:00
Omar SobhandClaude Fable 5.1	00f73eb70a	rtx-cfd: overset CFD1 harness — the steady-march stall rule (stall_rounds 2) actually enabled (the previous commit's edit had missed its anchor) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-05 20:28:25 -07:00
Omar SobhandClaude Fable 5.1	9761cf2319	rtx-cfd: overset P4 — CFD1 on the composite (tests/overset_cfd1.rs): ny=41 wall drag 15.2156 (+6.46%), lift 1.0879 (−2.78%), CV drag 15.528 (+8.64%), routes 2.0% apart (staircase +10%); 28550 steps, 2099 s at dt 4.57e-4 with 5.0 Schwarz rounds mean (stall rule off) — steady-march stall rule on for the next rungs ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-05 20:27:52 -07:00
Omar SobhandClaude Fable 5.1	45ff34da8f	rtx-cfd: overset P4-0 — the O-grid around the Turek–Hron rigid body (cylinder + flag), gated ... patch_gen::{cylinder_flag_outline, cylinder_flag_patch, winslow_smooth, respace_rays} (+ convex_hull, offset_convex_polygon, nearest_on_polyline): the outline CCW then reversed to clockwise (tip semicircle 16 cells, junction fillets of a FIXED radius with 3 cells, straights graded 0.3 h → h, cylinder arc at h); the outer ring the 6 h normal offset of the body's convex hull; initial pairing by the inner point's normal offset projected onto the hull offset (an arclength-proportional pairing folded the transfinite grid at the tip: rays crossed where the curvatures differ); Winslow (TTM) smoothing of the interior with the outer nodes SLIDING along the hull offset (each re-placed at the nearest point to the extrapolated ray), then re-spacing along the smoothed rays to the across stretch. Gates (tests/patch_cylinder_flag.rs): ny = 41/62/82 → 143×12 / 183×12 / 225×12 cells, positive, wall row 0.23 h (fillet max 0.37 / 0.43 / 0.50 h), worst non-orthogonality 76.6 / 69.1 / 63.3° at the concave fillets (structural: a concave arc's normals converge at its centre), classification of the benchmark background with both donor invariants. P0 MMS on these meshes (tests/cylinder_flag_mms.rs, exact acceptors, line-implicit): Stokes orders 2.17 / 2.13, upwind 2.00 / 1.86 (cell Péclet ≈ 0.1), divergence ≤ 9e-14 — the fillet skew costs nothing measurable. Rule: a refinement ladder's geometry must be fixed in physical units — with fillet = h/2 the Stokes orders read 1.74 → 1.31, the O(h) boundary perturbation masquerading as a scheme defect; the fillet is a parameter (5 mm across the ladder). Also: the P3b knock-outs H1/H2 on the balanced default (no effect), the P3 §5.10 record in the falsifier's header. Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-05 19:50:14 -07:00
Omar SobhandClaude Fable 5.1	62df6bd628	rtx-cfd: overset P3b — the reclassification impulse located (the fringe ring is a staircase of the interpolated velocities' mass defect) and removed by a converged fringe flux balance (default on): falsifier max spike 594 → 5.50 N/m at the FSI2 step (staircase 6490), 10.95 / 16.79 at dt/2 / dt/4 (12600 / 25600), rms spike 0.07% of the force, far probe 6 (7900), KE per event 4.9e-3 J/m falling with Δt (2.6 fixed) ... OverlapMap::balance_fringe_fluxes: Gauss–Seidel through the prescribed faces of every fringe cell to 1e-12 of the prescribed flux scale (≤ 50 sweeps), after every fringe stamping (3 fixed sweeps 101 N/m, 10 sweeps 5.5 — converged is the rule). OversetParameters: fringe_flux_balance (default on, RTX_OVERSET_NO_BALANCE off), fringe_balance_tolerance, refill_turned_active (measured no effect: 593.7 → 593.8; kept as the record), stall_rounds opt-in. P3b locating trace RTX_OVERSET_TRACE_SP (continuity source by class change in cell volumes/step, stored-pressure jump of turned-active cells): the flipped cells' mass source ≤ 6e-3 cell volumes/step, their stored pressure 5–10% of the range off their neighbours (4.4% on the static MMS — the meshes' discretization disagreement). Knock-outs refuted (RTX_OVERSET_H1 keep own face velocities, H4 no warm start, pressure refill): 593–597 N/m each. S4 MMS with the balance: velocity errors within 0.1% of the pinned values, the background's overlap mass defect 1e-13 by construction, pressure errors unchanged. overset_mms prints pressure diagnostics; overset_falsifier records the balanced ladder (regression guard 20 N/m at dt; RTX_OVERSET_FALSIFIER_STRICT asserts the registered gates — (ii) holds at dt, misses at dt/2, dt/4; (iv) fails: residual ∝ 1/Δt^0.8). Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-05 19:16:16 -07:00
Omar SobhandClaude Fable 5.1	6b8837301f	rtx-cfd: overset Schwarz stall detection is opt-in (stall_rounds, default 0): right for a steady march (n=64: 2.26 rounds mean, no cap hits, L2 identical), wrong for a transient (falsifier max spike 594 → 4044 N/m when on); the MMS harness sets 2 ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-05 18:35:06 -07:00
Omar SobhandClaude Fable 5.1	e2edff9b1d	rtx-cfd: overset A-P3 — the falsifier plate on the overset (FAILS the registered gates by one order less than the staircase); wall force; composite pressure-level pin; Schwarz stall detection ... patch_gen::{stadium, graded_fractions}: the falsifier plate as a stadium O-grid (semicircular ends r = half-thickness; 16 cells per end arc, straights graded 0.30 h -> h at 1.15, offset 6 h, 12 rows stretched 4x; 148x12 cells, every ray a normal, worst non-orthogonality 4 deg). CurvilinearPisoSolver::surface_force (+ PatchLoad): F = sum(-p_f S_f + mu (grad u + grad u^T)_f . S_f) on the wall faces with the wall cell's LSQ gradients (wall Dirichlet in the velocity fit); HELD on the phantom circle against the exact stress integral: 1.3e-2 / 6.3e-3 / 3.6e-3 at n = 32/64/128 (orders 1.05 / 0.81), 22x the staircase's accuracy. OversetPisoSolver: the composite p' level pinned to zero mean over the active cells every round (the coupled problem is pure Neumann; the temporal warm start handed each step's level to the next — background pressure 1e7 growing 5e4 per step on the falsifier; an unpinned level also inflated the relative Schwarz stop); stall detection (no progress over three rounds = the inner solvers' noise floor; 6560 of 150k steps burned the 20-round cap at n = 64, a 7.5 h n = 128 march); schwarz_stalled in the result. tests/overset_falsifier.rs (records; RTX_OVERSET_FALSIFIER_STRICT asserts the registered gates, _LADDER runs dt/2 and dt/4, _TRACE the top-12 spike steps): max spike 594 / 981 / 1720 N/m at dt / dt/2 / dt/4 (staircase 6490 / 12600 / 25600), rms spike 61-89 (810), far probe 502-1509 (7900), KE injection 0.16-0.21 J/m per event on the common cell set (2.6) — every large spike a ~104-cell full-row reclassification; exponent -0.77 (-1.0). The registered 5% gate (8.75 N/m) is missed 68x: the overset's own reclassification impulse is the finding (omni-cortex overset_metal_campaign.md §5.10); P3b = locate per cell, then the fringe flux balance. tests/patch_stadium.rs, curvilinear_loads.rs, overset_common::plate_patch. Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-05 04:32:43 -07:00
Omar SobhandClaude Fable 5.1	afd1bff6ee	rtx-cfd: overset A-P2 — the patch overlaps the background (OversetPisoSolver), gated S1–S5 ... Background = the embedded solver with a mask from the overlap classification (embedded/{mod,projection}.rs: module split, projection's solve/apply halves, set_overlap, fringe p' Dirichlet by elimination into extra_diag/rhs, anchor dropped, set_inner_stop_factor, phase API begin_step/solve_correction/ apply_correction/end_step; advance rebuilt on the phases — every suite digit- identical, FSI2 default line-for-line). Patch = the curvilinear solver with an acceptor ring (set_side_velocity; set_acceptor_ring/stamp_acceptors/ set_acceptor_correction; acceptor Dirichlet by elimination into PressureSystem.links so the BiCGSTAB stop stays in flux units — identity rows measured unconverged at 2431 iterations; same phase API). overset/overlap.rs: OverlapMap — hole/fringe/active from the patch's own indices (hole = body or k <= nn-1-overlap_rows, DEFAULT_OVERLAP_ROWS = 4 from the 2.9 h depth budget), dual-quad inverse-bilinear donors patch→fringe, lattice donors →acceptors, both invariants asserted, mass-defect measures. overset/mod.rs: OversetPisoSolver — advance (exchange rebuilt BEFORE the predictors from the previous corrected field), alternating Schwarz on the acceptor p' vector with Anderson(3) (plain Schwarz measured 0.82/round: floating patch, Neumann wall) and the previous step's vector as warm start (1 round/corrector at steady state), stop relative to the STEP's p' scale (the MG absolute stop is 1e-9/dt² in pressure — the whole second correction), set_patch_mesh, snapshot/restore carrying the warm-start vector. Gates: overlap linear-exact 1e-13, quadratic orders 1.96/1.99 (acceptors), 1.40/1.91 (fringe); half-couplings: patch with exact acceptors Stokes 2.07/1.98 + 2.08/1.98, upwind 0.84/0.84, background with exact fringe 7.86e-3/2.90e-3/ 1.09e-3 (1.44/1.41); two-mesh MMS n=32/64: background 8.717e-3/4.207e-3 (1.03x/ 0.97x the embedded circle), patch 1.322e-2/6.904e-3 (1.5-1.6x), orders 1.05/ 0.94, patch div <= 5e-13, overlap mass defect 3.6e-3 -> 8.2e-4 of the overlap flux (under the registered 1e-3 from n=64; disclosed at 32); motion: stationary patch through set_patch_mesh bit-identical, snapshot/restore with a pending mesh bit-identical, translating phantom circle 1.22x/1.19x the static level over 4.5 cells. Inherited, disclosed: poisson_equivalence's no-body multigrid pin fails by 3.9e-9 at d46fb0b (M1's commit; verified in a clean worktree). Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-04 19:24:13 -07:00
Omar SobhandClaude Fable 5.1	d46fb0b7a7	rtx-cfd: overset A-P1 GATED — the curvilinear patch moves and deforms under an exact 2-D DGCL ... StepGeometry (motion.rs): time-averaged face vectors S̄_f = ½(S^n + S^{n+1}) and swept volumes δV_f = S̄_f·δc_f — exact for linear node motion on any quad, so Σ sign δV_f = V^{n+1} − V^n is algebra (1.8e-14 measured; the EndOfStep control 2.1e-3). CurvilinearPisoSolver::set_mesh(next) names the end-of-step geometry; advance swaps it in, rebuilds operators + pressure matrix on it (L_f, LSQ gradients, no mesh-velocity term in the projection), keeps the old mesh for V^n and the explicit boundary data; predictor in the conservative ALE form V^{n+1} û = V^n u^n + dt(−Σ sign (F − δV/dt) u_f + ν D + f V^n), written as u·(V^n/V^{n+1}) + … so a stationary mesh is bitwise the static path; fluxes on S̄_f; snapshot carries both meshes; swept_face_rule knob (Trapezoidal default, EndOfStep = negative control). Stokes limit keeps the mesh flux (was dropped with convection) and centres it (upwinding it cost an order: 1.06/1.00). Gates (tests/curvilinear_ale.rs, 11 tests, 83 s): uniform flow on a wiggling AND bending annulus 4.44e-15 over 400 steps, p exactly 0, 0 pressure iterations; control deviates 4.9e-5; stationary mesh through the moving path bit-identical (both diffusion variants); snapshot/restore on the moving mesh bit-identical; Taylor–Green orders unchanged — upwind 0.995/0.976 vs fixed 0.987/0.975 at 1.05× error, Stokes 1.92/1.97 vs 1.94/1.99 at 2.4×, moving annulus 2.11/2.02; linear-field falsifier 1.95/1.92 (annulus), 1.91/1.43 (square, sliding wall nodes). P0 ladders re-run identical to every digit. Rule from the diagnosis: start a moving run ON the t = 0 mesh and sweep less than a cell per step — a first step that jumped 2–4 cells imprinted an O(displacement) error no refinement removed (dt- and motion-independent). Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-04 17:00:04 -07:00
Omar SobhandClaude Fable 5.1	c63d79c300	rtx-cfd/rtx-fsi: overset A-P0 GATED + M1 precision probe — curvilinear collocated PISO: relative-reduction pressure stop (the absolute stop floored |du/dt| at 2e-4 on 64²), line-implicit-n sign fix, adjustPhi; gates: Cartesian reduction 1.37–1.40x the staggered error at orders 0.83/0.90; skewed stretched periodic annulus Stokes orders 2.30/2.06 (explicit and line-implicit), upwind 1.08/0.80; Poiseuille exact to 1e-9 on Cartesian and affine-sheared periodic channels (both diffusion variants), varying-skew channel order 2.02 (v 1.9), cell mass 1e-14; divergence ≤ 1e-11 relative every step; snapshot/restore bit-identical. M1: poisson.rs multigrid hierarchy generic over MgScalar (f32/f64), f64 CG keeps its own fine level; MgPrecision on MultigridParameters/EmbeddedParameters/PisoParameters, set_poisson_precision, harness RTX_FSI2_POISSON_F32 (march + noise probe, printed marker); f64 arm bit-identical in vivo (FSI2 default line-for-line with 08-31), f32 arm holds the noise floor and stall pins and the FSI2 band; poisson_equivalence f32 arm ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-04 12:40:43 -07:00
Omar SobhandClaude Fable 5.1	52da75a3a9	rtx-cfd: curvilinear collocated PISO on a structured patch (overset A-P0, WIP) — PatchMesh (right-handed s,n; periodic seam with shift; face metrics), patch generators (TFI, skewed annulus, sheared/varying-skew channels), CSR + Jacobi-BiCGSTAB, the Zang–Street–Koseff incremental step with the node-based 9-point L_f, LSQ gradients, explicit and line-implicit-n predictors, adjustPhi; tests: mesh metrics (5 green), operators exact on linear fields incl. the seam (green), sparse (2 green), MMS ladder (Cartesian 16/32: 1.37–1.39x the staggered error, order 0.83; n=64 stalls at a |du/dt| floor 2e-4 — open, tolerance-scaling hypothesis), annulus/Poiseuille not yet run ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_01X2GmJXeQ2njUecEKiJZ1G2	2026-09-04 05:00:08 -07:00