4 Commits

Include renames

Author	SHA1	Message	Date
Omar SobhandClaude Fable 5.1	565215baf9	P5-1 instruments and discriminators: RTX_FSI2O_NO_WALL_VEL, _FREEZE_PATCH, _VOLUME_PRESERVE (the imposed wall velocity's net flux removed uniformly along the wall), the pass trace carries the fluid's power on the flag, the wall-pressure roughness, the patch's pressure level, the wall's net volume flux against the FEA polygon's area rate, and the mass defects — the s = 1 runaway is the flag's thickness breathing (ν = 0.4 Quad8) seen by the body-fitted wall as a volume flux equal to the polygon's area rate, answered by the projection's pressure level at ρ/dt ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 08:37:34 -07:00
Omar SobhandClaude Fable 5.1	2ed36c3a8c	P5-1 instruments: the overset fluid saves/loads its rigid-phase state (RTX_FSI2O_SAVE / _LOAD — a coupling experiment then costs seconds, not the 12-minute rigid march), dumps the interface edges when the composite refuses a patch (RTX_FSI2O_DUMP_DIR, at the advance where the overlap is rebuilt), the release time is the fluid's clock; patch_cylinder_flag_deformed: cells inside the flag are holes at small bends and both sweep counts (the cantilever shape does not reproduce the P5-1 death — the CSVs show a coupling runaway), and a dumped-edges reproduction test ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 08:09:56 -07:00
Omar SobhandClaude Fable 5.1	d74571e21a	rtx-cfd: the deformed cylinder–flag outline's edge fractions come from the UNDEFORMED straight edge (x_tip_ref), so the patch topology is the mesh family's and not the deformation's — the P5-1 gate run died at the first bend with set_mesh refusing 143 → 144 wall cells; the P5-0 test now gates ns across amplitudes (143 at −80 / +40 / +80 mm) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 07:34:26 -07:00
Omar SobhandClaude Fable 5.1	f0b2563bf8	P5-1: FSI2 with the fluid on the overset — fsi2_harness/overset.rs (the background without a body, the cylinder–flag patch regenerated around the deformed flag every pass via set_patch_mesh, the wall velocity from the interface velocities along the wetted polygon, the load from the patch's wall faces into WettedSurface::transfer_load — no probes, no clamp, no smoothing), fsi2_harness/overset_march.rs (the harness's rigid phase / release / subiterated coupling with its acceptance rule, no rescue machinery, death returned not panicked), tests/turek_hron_fsi2_overset.rs (RTX_FSI2O_* knobs); rtx-cfd: CurvilinearPisoSolver::wall_tractions (per-face pressure + full-stress traction, surface_force sums the same terms bit-identically); Interface::edges (bottom/tip/top for the generator); cylinder_flag_mms RTX_CF_BEND (P5-0 gate iv: Stokes orders 2.14 / 2.09 on the flag bent to 80 mm) ... Co-Authored-By: Claude Fable 5.1 <[email protected]> Claude-Session: https://claude.ai/code/session_0116sg1Qz1gMv9hdcKP1XUam	2026-09-07 07:16:53 -07:00