embedded3 S2-5: the cut wall sat ½(1−α)h inside the body — cross diffusion over the open-part centroid spacing (RTX_E3_DIFFUSION_CENTROID; host + e3_cut.cu, shift tables, point-implicit excess); flat-wall effective-position instrument; DFG 2D-1 ladder tests (device + host); knobs tried and refuted along the way (oblique distance, axis exchange, centroid pressure gradient)

Co-Authored-By: Claude Fable 5.1 <[email protected]>

crates/specialized/rtx-cfd/tests/embedded3_dfg_2d1_host.rs

@@ -0,0 +1,140 @@
+//! S2-5 host ladder: DFG 2D-1 (Re 20) on a periodic-z slab of 4 cells with
+//! every knob of the cut wall read from the environment — the instrument
+//! for host-only prototypes (`RTX_E3_PRESSURE_CENTROID=1`). Reference
+//! c_D 5.57954, c_L 0.010619, Δp 0.117520. `RTX_E3_DFG_NY` (default 62).
+use rtx_cfd::solvers::incompressible::ConvectionScheme;
+use rtx_cfd::solvers::incompressible::embedded3::{
+    Body, Boundaries, Field, Fluid, Grid, Parameters, Side, Solver, WallScheme,
+};
+
+const H: f64 = 0.41;
+const L: f64 = 2.2;
+const D: f64 = 0.1;
+const CX: f64 = 0.2;
+const CY: f64 = 0.2;
+const U_M: f64 = 0.3;
+const U_BAR: f64 = 2.0 / 3.0 * U_M;
+const RHO: f64 = 1.0;
+const NU: f64 = 1e-3;
+
+fn inflow(y: f64, _z: f64) -> f64 {
+    4.0 * U_M * y * (H - y) / (H * H)
+}
+
+#[test]
+#[ignore = "host DFG at ny 31 with the routes split (about half an hour)"]
+fn dfg_2d1_on_the_host() {
+    let ny: usize = std::env::var("RTX_E3_DFG_NY")
+        .ok()
+        .and_then(|v| v.parse().ok())
+        .unwrap_or(62);
+    let h = H / ny as f64;
+    let nx = (L / h).round() as usize;
+    let nz = 4;
+    let lz = nz as f64 * h;
+    let dt = (0.3 * h / U_M).min(0.5 * h * h / (6.0 * NU));
+    let mut solver = Solver::new(
+        Fluid {
+            density: RHO,
+            viscosity: RHO * NU,
+            reference_velocity: U_BAR,
+            reference_length: D,
+        },
+        Parameters {
+            corrector_steps: 2,
+            tolerance: 1e-8,
+            convection_scheme: ConvectionScheme::TvdVanAlbada,
+            wall_scheme: WallScheme::CutCell,
+            boundaries: Boundaries {
+                x1: Side::PressureOutlet,
+                z0: Side::Periodic,
+                z1: Side::Periodic,
+                ..Boundaries::default()
+            },
+            ..Parameters::default()
+        },
+    );
+    solver.set_boundary_velocity(|x, y, z, _t| {
+        if x <= 0.0 {
+            (inflow(y, z), 0.0, 0.0)
+        } else {
+            (0.0, 0.0, 0.0)
+        }
+    });
+    solver.set_body(Body::extruded(
+        rtx_cfd::solvers::incompressible::EmbeddedBody::circle(CX, CY, 0.5 * D),
+        lz,
+    ));
+    let g = Grid::cubic(nx, ny, nz, h);
+    let mut field = Field::new(g);
+    for k in 0..nz {
+        for j in 0..ny {
+            let u0 = inflow((j as f64 + 0.5) * h, (k as f64 + 0.5) * h);
+            for i in 0..=nx {
+                field.u[g.uface(k, j, i)] = u0;
+            }
+        }
+    }
+    solver.initialize(&mut field);
+    let coef = 2.0 / (RHO * U_BAR * U_BAR * D * lz);
+    let steps = (12.0 / dt).ceil() as usize;
+    let start = std::time::Instant::now();
+    let mut last = (0.0, 0.0);
+    for step in 0..steps {
+        let r = solver.advance(&mut field, dt);
+        if (step + 1) % (steps / 20).max(1) == 0 || step + 1 == steps {
+            let t = solver.time();
+            let mask = solver.mask().unwrap();
+            let body = solver.body().unwrap();
+            let mu = RHO * NU;
+            let (po, so) = mask.cut_wall_force_parts(body, &field, mu, t).unwrap();
+            let ex = mask
+                .cut_wall_exchange_force(body, &field, mu, RHO, t, None)
+                .unwrap();
+            let (pr, sr) = mask
+                .cut_wall_force_reconstructed_parts(body, &field, mu, t, None)
+                .unwrap();
+            let margin = 1.5 * D;
+            let ci = |x: f64| ((x / h).round() as usize).clamp(2, nx - 2);
+            let cj = |y: f64| ((y / h).round() as usize).clamp(2, ny - 2);
+            let bx = (
+                ci(CX - margin),
+                ci(CX + margin),
+                cj(CY - 0.15),
+                cj(CY + 0.15),
+                0,
+                nz,
+            );
+            let fcv = mask.control_volume_force_with_walls(&field, dt, RHO, mu, None, bx, false);
+            let cd = |f: [f64; 3]| coef * f[0];
+            println!(
+                "  t {t:7.3}: c_D operator {:.4} (p {:.4} + s {:.4} + exchange {:.4}) | reconstructed {:.4} (p {:.4} + s {:.4}) | box {:.4} c_L {:.5} Δp {:.5}; residual {:.1e} [{:.0} s]",
+                cd(po) + cd(so) + cd(ex),
+                cd(po),
+                cd(so),
+                cd(ex),
+                cd(pr) + cd(sr),
+                cd(pr),
+                cd(sr),
+                cd(fcv),
+                coef * (po[1] + so[1] + ex[1]),
+                mask.pressure_at(&field.p, CX - 0.5 * D, CY, 0.5 * lz)
+                    .unwrap_or(f64::NAN)
+                    - mask
+                        .pressure_at(&field.p, CX + 0.5 * D, CY, 0.5 * lz)
+                        .unwrap_or(f64::NAN),
+                r.final_residual,
+                start.elapsed().as_secs_f64()
+            );
+            let now = (cd(po) + cd(so) + cd(ex), cd(fcv));
+            if (now.0 - last.0).abs() < 1e-4 * now.0.abs()
+                && (now.1 - last.1).abs() < 1e-4 * now.1.abs()
+                && t > 2.0
+            {
+                println!("  settled");
+                break;
+            }
+            last = now;
+        }
+    }
+}